Re: RLINK32 Error opening File "C:\...\*.dfm"
Posted: Fri Sep 25, 2020 3:54 am
I turned the setting off, looks good so far!
JomiTech Forums
Discussion forums for JomiTech products
https://jomitech.com/forums/
RLINK32 Error opening File "C:\...\*.dfm"
Page 2 of 2
Re: RLINK32 Error opening File "C:\...\*.dfm"
Posted: Fri Sep 25, 2020 8:25 pm
Interesting. Hopefully it is an acceptable workaround. Still haven't had any luck reproducing the issue.
Re: RLINK32 Error opening File "C:\...\*.dfm"
Posted: Mon Oct 12, 2020 11:51 pm
I would prefer it the other way. But the important thing is, that it works now and it does 
I also tried to reproduce it in a sample project, but had no luck (maybe the error only occurs if the project is a little bit bigger). I try to investigate further in it to provide you a "working" example, when i have time for it.
I also tried to reproduce it in a sample project, but had no luck (maybe the error only occurs if the project is a little bit bigger). I try to investigate further in it to provide you a "working" example, when i have time for it.
Re: RLINK32 Error opening File "C:\...\*.dfm"
Posted: Thu Oct 15, 2020 8:25 am
I have a fix that may solve this issue. Please download the following file and extract it into the TwineCompile Program Files directory.
http://jomitech.com/downloads/JTBuildInterface104.zip
http://jomitech.com/downloads/JTBuildInterface104.zip
Re: RLINK32 Error opening File "C:\...\*.dfm"
Posted: Sun Oct 18, 2020 11:39 pm
Thank you! I'll give it a try and let you know!
Re: RLINK32 Error opening File "C:\...\*.dfm"
Posted: Tue Oct 20, 2020 9:06 am
Unfortunately this didn't solved the problem 